Ph.D.
· Elvedin Kljuno, “Elastic Cable-Driven Bipedal Walking Robots: Design, Modeling, Dynamics and Controls”, ME, November 16, 2012.
· T.J. Cyders, “Analysis and Experimental Comparison of Models of a New Form of Continuously Variable Transmission”, ME, September 20, 2012.
· Ernur Karadogan, “A Cable-Actuated Robotic Lumbar Spine as the Haptic Interface for Palpatory Training of Medical Students”, ME, November 4, 2011.
· Meng-Yun Chen, “The Virtual Haptic Human Upper Body for Palpatory Diagnostic Training”, ME, November 5, 2010.
· Wei Ji, “Spatial Partitioning and Functional Shape Matched Deformation Algorithm for Interactive Haptic Modeling”, EECS, October 29, 2008.
· Jianhua Wu, “Dynamic Path Planning of an Omni-Directional Robot in a Dynamic Environment”, Integrated Engineering, October 8, 2004.
MSME
·
Noah Needler, “Design
of an Algae Harvesting Cable Robot, Including a Novel Solution to the Forward
Pose Kinematics Problem”, July 16, 2013.
·
Joey
Feck, “Evaluation of a 3-RSR Parallel Manipulator”, April 24, 2013.
·
Xiao Xue, “Investigation into the Utility of the MSC ADAMS
Dynamics Software for Simulating Robots and Mechanisms”, April 5, 2013.
·
Alex
Grammar, “Surface Electromyographic Control of a
Humanoid Robot”, November 14, 2012, EECS, Dr. Bob advisor.
· Jun Ding, “Mechanism Design, Kinematics, and Dynamics Analysis of a 7-dof Cable-Driven Humanoid Robot Arm”, March 1, 2011.
· Michael Starkey, “Multiple Cable Actuation utilizing Capstan Friction”, BME, May 2, 2010.
· Adam Shank, “Improvement and Evaluation of Three Cable Haptic Interface”, May 23, 2008.
· Ming Xin, “Kinematics, Dynamics, and Controller Design for the Contour Crafting Cartesian Cable (C4) Robot”, May 20, 2008.
·
Wan Xu, “Nonlinear
Control for Cable Robot Systems with Unidirectional Actuation”,
·
Daniel Kessler, “Mechanical Design of a Four
Wheel Omni-Directional Autonomous Robot”,
·
Justin Bahar,
“Analysis of an Omni-Directional Four Wheel Autonomous Robot”,
· Chandana Venkatayogi, “Simulation of a Humanoid Robot”, October 30, 2007.
· Elvedin Kljuno, “Vehicle Simulation System: Controls and Virtual-Reality-Based Dynamics Simulation”, June 6, 2007.
· Eric LaFay, “REACH Haptic Exoskeleton”, May 30, 2007.
· Mayank Srivastava, “Implementation and Evaluation of a Multiple-Points Haptic Rendering Algorithm”, February 27, 2007, MSCS, Robert L. Williams II, advisor.
· Venkat Chadaram, “Three-Cable Haptic Interface”, December 6, 2006.
· Ben Snyder, “Maquette-Enlarging Cable-Suspended Robot”, March, 2006.
· Andy Dick, “Development Feasibility of a Universal Robot / Automation Equipment Controller”, November 11, 2005.
· Christopher Maynard, “A Novel Approach for Road Construction using an Automated Paving Robot”, August 8, 2005.
· Wei Ji , “Viewing Options for the Virtual Haptic Back”, May 19, 2005.
· Ernur Karadogan, “Teleoperation of an Industrial Robot using Resolved Motion Rate Control with Visual Servoing”, May 24, 2005.
· Jansen Litter, “Mobile Robot for Search & Rescue”, June 2, 2004.
· Mayank Srivastava, “Implementation and Evaluation of a Haptic Playback System for the Virtual Haptic Back”, January 13, 2004.
· Adam Landis, “Optimization of a Paraffin Cooling System for an Automated Tissue Embedding Center”, November 14, 2003.
· Xingxi He, “Haptics-Augmented Undergraduate Engineering Education: Implementation and Evaluation”, August 11, 2003.
· Timothy P. Henning, “Dynamics and Control for an Omni-Directional Robot”, June 13, 2003.
· Jigar Vadia, “Planar Translational Cable-Direct-Driven Robots”, August 12, 2002.
· John Miller, “Lego DACTA Control Lab for Teaching Robotics”, August 24, 2001.
· Kerry L. Holland, “Design of a Virtual Haptic Back ”, May 25, 2001.
· Brian E. Carter, “Omni-Directional Locomotion for Mobile Robots ”, OU RoboCup Team, May 10, 2001.
· Dana B. Poling, “Spherically-Actuated Platform Manipulator ”, May 26, 2000.
· John J. Ottersbach, "Controls Development for the Pallet Handling Device", September 29, 1999.
· Robert J. Nyzen, "Analysis and Control of an Eight-Degree-of-Freedom Manipulator", August 13, 1999.
· Devon K, Jacobs, "Investigation of a Commercially-Available Haptic Interface", 1999.
· Nong Lin, "Modeling and Analysis for the Cable-Suspended Haptic Interface", 1998.
· Russell H. Moody, "Prototype Design of Cable-Suspended Haptic Interface", 1998.
· Rex J. Kuriger, "Kinematics, Statics, and Dexterity of Planar Active Scaffolding Structures", 1997.
· Nicholas Batsios, "Design and Construction of a Multi-Segment Snake-Like Wheeled Vehicle", 1997.
· James B. Mayhew IV, "Cartesian Control of Truss-based Manipulators Using the Virtual Serial Manipulator Approach", 1996.
Visiting Faculty / Researchers
Elvedin
Kljuno, Fulbright Scholar Researcher,
Mechanical Engineering, Sarajevo, Bosnia
Fuzzy Logic and Genetic
Algorithms for Mobile Robot Control, August 2006 – July 2007
Federica
Giacometti and Michele Castagnini, Undergraduate Researchers Dr.
Paolo Gallina, University of Padova, Italy,
2000-2001
Mechanical
Engineering, University of Padova, Italy, NIST cable-direct-driven Cable-direct-driven
haptic interfaces and robots
robot
project and cable-direct-driven haptics interface project, 2005 - 2006 Sliding
dynamics for omni-directional mobile robots
Graduate
Student Defense Photos
Noah Needler
Elvedin Kljuno Ph.D. TJ Cyders Ph.D.
Meng-Yun
Chen Ph.D. Ernur
Karadogan Ph.D.
Michael
Starkey Wei
Ji Ph.D.
Wan
Xu Dan
Kessler and Justin Bahar
Chandana
Venkatayogi Elvedin
Kljuno
Jianhua
Wu Ph.D. Jansen
Litter