Chapter 3: The First Law of Thermodynamics for Closed Systems

b) Ideal Stirling Cycle Machines (Engines / Coolers)

1. The Stirling Cycle Engine

Conceptually the Stirling engine is the simplest of all heat engines. It has no valves, and includes an externally heated space and an externally cooled space. It was invented by Robert Stirling, and an interesting website by Bob Sier includes a photograph of Robert Stirling, his original patent drawing of 1816, and an animated model of Stirling's original engine.

In its original single cylinder form the working gas (typically air or helium) is sealed within its cylinders by the piston and shuttled between the hot and cold spaces by a displacer. The linkage driving the piston and displacer will move them such that the gas will compress while it is mainly in the cool compression space and expand while in the hot expansion space. This is clearly illustrated in the adjacent animation which was produced by Richard Wheeler (Zephyris) of Wikipedia.

Refer also to the animation produced by Matt Keveney in his Stirling engine animation website. Since the gas is at a higher temperature, and therefore pressure, during its expansion than during its compression, more power is produced during expansion than is reabsorbed during compression, and this net excess power is the useful output of the engine. Note that there are no valves or intermittent combustion, which is the major source of noise in an internal combustion engine. The same working gas is used over and over again, making the Stirling engine a sealed, closed cycle system. All that is added to the system is steady high temperature heat, and all that is removed from the system is low temperature (waste) heat and mechanical power.

 

Athens, Ohio, is a hotbed of Stirling cycle machine activity, both engines and coolers, and includes R&D and manufacturing companies as well as internationally recognized consultants in the area of Stirling cycle computer analysis. The parent company of this activity is Sunpower. It was formed by William Beale in 1974, mainly based on his invention of the free-piston Stirling engine which we describe below. They developed a 1kW free-piston engine/generator, and since 1995 this technology was used by British Gas to develop CHP (Combined Heat and Power) units – the 1kW engine/generator is currently manufactured by Microgen Engine Corporation (refer to their History and Engine web pages).
In 2013 Sunpower was acquired by Ametek in Pensylvania, however continues doing Stirling cycle machine development in Athens, Ohio.

Some examples of single cylinder Stirling engines: Stirling Technology (note recent company name change: Combined Energy Technology) is a spinoff of Sunpower, and was originally formed in order to continue the development and manufacture of the 3.5 kW ST-5 Air engine. This large single cylinder engine burns biomass fuel (such as sawdust pellets or rice husks) and can function as a cogeneration unit in rural areas. It is not a free-piston engine, and uses a bell crank mechanism to obtain the correct displacer phasing.
Currently Combined Energy Technology is working with Microgen Engine Corporation, an international company which produces the MEC 1kW free-piston engine/generator. Combined Energy Technology has developed a multifuel burner for the engine and is partnering with Microgen to get various systems into the market.

Another important early Stirling engine is Lehmann's machine on which Gustav Schmidt did the first reasonable analysis of Stirling engines in 1871. Andy Ross of Columbus, Ohio built a small working replica of the Lehmann machine, as well as a model air engine.

Solar Heat and Power Cogeneration: With the current energy and global warming crises, there is renewed interest in renewable energy systems, such as wind and solar energy, and distributed heat and power cogeneration systems. Cool Energy of Boulder, Colorado, previously developed a complete solar heat and power cogeneration system for home usage incorporating Stirling engine technology for electricity generation. This unique application included evacuated tube solar thermal collectors (slide courtesy of rusticresource.com), thermal storage, hot water and space heaters, and a Stirling engine/generator using nitrogen gas. Currently they are concentrating on low temperature (150°C - 400°C) waste heat recovery systems (Refer: Cool Energy ThermoHeart 25kW Engine Overview).

Ideal Analysis: Please note that the following analysis of Stirling cycle engines is ideal, and is intended only as an example of First Law Analysis of closed systems. In the real world we cannot expect actual machines to perform any better than 40 - 50% of the ideal machine. The analysis of actual Stirling cycle machines is extremely complex and requires sophisticated computer analysis (see for example the web learning resource on: Stirling Cycle Machine Analysis.)

The free-piston Stirling engine developed by Sunpower, Inc is unique in that there is no mechanical connection between the piston and the displacer, thus the correct phasing between them occurs by use of gas pressure and spring forces. Electrical power is removed from the engine by permanent magnets attached to the piston driving a linear alternator. Basically the ideal Stirling engine undergoes 4 distinct processes, each one of which can be separately analysed, as shown in the P-V diagram below. We consider first the work done during all four processes.

The net work Wnet done over the cycle is given by: Wnet = (W3-4 + W1-2), where the compression work W1-2 is negative (work done on the system).

We now consider the heat transferred during all four processes, which will allow us to evaluate the thermal efficiency of the ideal Stirling engine. Recall from the previous section that in order to do a First Law analysis of an ideal gas to determine the heat transferred we needed to develop equations to determine the internal energy change Δu in terms of the Specific Heat Capacities of an Ideal Gas.

The two constant volume processes are formed by holding the piston in a fixed position, and shuttling the gas between the hot and cold spaces by means of the displacer. During process 4-1 the hot gas gives up its heat QR by passing through a regenerator matrix, which is subsequently completely recovered during the process 2-3.


We will find in Chapter 5 that this is the maximum theoretical efficiency that is achievable from a heat engine, and usually referred to as the Carnot efficiency. For more information on this subject, refer to a paper: A Meeting between Robert Stirling and Sadi Carnot in 1824 presented at the 2014 ISEC.

Note that if no regenerator is present the heat QR must be supplied by the heater. Thus the efficiency will be significantly reduced to ηth = Wnet / (Qin + QR). Furthermore the cooler will then have to reject the heat that is normally absorbed by the regenerator, thus the cooling load will be increased to Qout + QR. Recall that Q2-3 = QR = -Q4-1.

Note that the practical Stirling cycle has many losses associated with it and does not really involve isothermal processes, nor ideal regeneration. Furthermore since the Free-Piston Stirling cycle machines involve sinusoidal motion, the P-V diagram has an oval shape, rather than the sharp edges defined in the above diagrams. Nevertheless we use the ideal Stirling cycle to get an initial understanding and appreciation of the cycle performance.

Problem 3.2 - The Sunpower EG-1000 Stirling Engine/Generator
___________________________________________________________________

2. The Stirling Cycle Cooler

One important aspect of Stirling cycle machines that we need to consider is that the cycle can be reversed - if we put net work into the cycle then it can be used to pump heat from a low temperature source to a high temperature sink. Sunpower has been actively involved in the deveplopment of Stirling cycle refrigeration systems and produces Stirling cycle croygenic coolers for liquifying oxygen. In 1984 Sunpower developed a free piston Duplex Stirling Machine having only three moving parts including one piston and two displacers, in which a gas fired Stirling cycle engine powered a Stirling cycle cooler. Global Cooling was established in 1995 as a spinoff of Sunpower, and was formed mainly in order to develop free-piston Stirling cycle coolers for home refrigerator applications. These systems, apart from being significantly more efficient than regular vapor-compression refrigerators, have the added advantage of being compact, portable units using helium as the working fluid (and not the HFC refrigerants such as R134a, having a Global Warming Potential of 1,300). More recently Global Cooling decided to concentrate their development efforts on systems in which there are virtually no competitive systems - cooling between -40°C and -80°C, and they established a new company name: Stirling Ultracold .
Update - 2021: Stirling Ultracold's Ultra-Low Temperature (ULT) freezers meet today's unprecedented COVID-19 deployment challenges. Refer to Walgreens COVID-19 Vaccine Case Study as well as Stirling Ultracold to Merge with Biolife Solutions.

We are fortunate to have obtained two original M100B coolers from Global Cooling. The one is used as a demonstrator unit, and is shown in operation in the following photograph. The second unit is set up as a ME Senior Lab project in which we evaluate the actual performance of the machine under various specified loads and temperatures.

A schematic diagram followed by an animated schematic of the cooler (both courtesy of Global Cooling (currently Stirling Ultracold) are shown below

Conceptually the cooler is an extremely simple device, consisting essentially of only two moving parts - a piston and a displacer. The displacer shuttles the working gas (helium) between the compression and expansion spaces. The phasing between the piston and displacer is such that when the most of the gas is in the ambient compression space then the piston compresses the gas while rejecting heat to the ambient. The displacer then displaces the gas through the regenerator to the cold expansion space, and then both displacer and piston allow the gas to expand in this space while absorbing heat at a low temperature.

______________________________________________________________________________________

Problem 3.3 - Stirling Cycle Cooler M100B - Ideal Analysis

Unfortunately the analysis of actual Stirling cycle machines is extremely complex and requires sophisticated computer analysis. We consider the idealised model of this cooler defined in terms of the P-V diagram shown below in order to determine the ideal performance of the M100B under typical operating conditions as described below. (Note that the values presented here are not actual values of the M100B, however were devised by your instructor for purposes of this exercise only).

Process (1)-(2) is the isothermal compression process at temperature TC = 30°C, during which heat QC is rejected to the ambient. Process (2)-(3) is the constant volume displacement process during which heat QR is rejected to the regenerator matrix. Process (3)-(4) is the isothermal expansion process at temperature TE = -20°C, during which heat QE is absorbed from the freezer, and finally process (4)-(1) is the constant volume displacement process during which heat QR is absorbed from the regenerator matrix. Thus the ideal Stirling cycle consists of four distinct processes, each one of which can be separately analysed. State (1) is defined at a maximum volume of 35 cm3 and a pressure of 1.9 MPa, and State (2) is defined at a minimum volume of 30 cm3. The energy transferred during both the compression and expansion processes is indicated on P-V diagrams as follows:

Since the working fluid is helium which is an ideal gas, we use the ideal gas equation of state throughout. Thus P V = m R T, where R = 2.077 kJ/kg K, and Δu = Cv ΔT, where Cv = 3.116 kJ/kg K. (refer: Ideal Gas Properties)

______________________________________________________________________________________

On to Part c) of The First Law - Diesel Cycle Engines

On to Part d) of The First Law - Otto Cycle Engines

______________________________________________________________________________________


Engineering Thermodynamics by Israel Urieli is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License